Unisteel International

ASME SA387 & ASTM A387 (Project Supply)

 ASME SA / ASTM A387 Gr 11 Cl. 2

ASME SA / ASTM A387 Gr 22 Cl. 2 

 ASME SA / ASTM A387 Gr 5 Cl. 2

ASME SA / ASTM A387 Gr 9 Cl. 2

 
Unisteel International supplies Chrome Moly plates to ASME SA387 and ASTM A387 both from stock and, where required by the customer, cut to size and shape. There are broadly equivalent specifications produced to the European standard EN 10028-2 and these are also supplied Unisteel International.
 
Both SA387 and A387 are described as a "Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum". The specification covers alloy steel plates intended primarily for welded boilers and pressure vessels designed for elevated temperature use.
 
Plates are available under these specifications in several grades each having different nominal Chromium (Cr) and Molybdenum (Mo) contents as follows:
 
Grade
Nominal Cr Content (%)
Nominal Mo Content (%)
     2
                0.50
                0.50
    12
                1.00 
                0.50 
    11
                1.25 
                0.50 
 22, 22L
                2.25 
                1.00 
 21, 21L
                3.00 
                1.00 
     5
                5.00 
                0.50 

   9, 91

                9.00 

                1.00 

Each grade except Grades 21L, 22L, and 91 is available in two classes of tensile strength described as Class 1 and Class 2.    

The most regularly specified grades and hence those that are most readily available from stock are Grades 12, 11, 22, 5, and 9 and in most case stock plates will be produced to the tensile requirements of Class 2.

The following tables give information on the chemical and mechanical properties of all of the grades:

> Chemical Requirements

(cast analysis, % by mass, maximum permitted unless indicated otherwise)

 

Gr. 2

Gr. 12

Gr. 11

Gr. 22

Gr. 22L

Gr. 21

Gr. 21L

Gr. 5

 Gr. 9

Gr. 91*

C

0.05-0.21

0.05-0.17

0.05-0.17

0.05-0.15

0.10

0.05-0.15 

0.10 

 0.15

 0.15

0.08-0.12 

Mn

0.55-0.80

0.40-0.65 

0.40-0.65

0.30-0.60 

0.30-0.60 

0.30-0.60 

0.30-0.60 

0.30-0.60 

0.30-0.60 

0.30-0.60 

P

0.025

0.025 

0.025

0.025

0.025 

0.025 

0.025 

0.025 

0.025 

0.020 

S

0.025

0.025 

0.025 

0.025 

0.025 

0.025 

0.025 

0.025 

0.025 

0.010 

Si

0.15-0.40

0.15-0.40 

0.50-0.80

0.50

0.50 

0.50

0.50

0.50

1.00 

0.20-0.50 

Cr

0.50-0.80

0.80-1.15 

1.00-1.50 

2.00-2.50

2.00-2.50

2.75-3.25

2.75-3.25

4.00-6.00

8.00-10.00 

8.00-9.50

Mo

0.45-0.60

0.45-0.60 

0.45-0.65

0.90-1.10 

0.90-1.10

0.90-1.10

0.90-1.10

0.45-0.65

0.90-1.10

0.85-1.05 

V

 -

 -

 -

-

 -

 -

 -

-

0.04 

0.18-0.25

*Grade 91 also includes restrictions on Nickel 0.40 max, Columbium 0.06-0.10, Nitrogen 0.030-0.070, Aluminium 0.02 max, titanium 0.01 max, Zirconium 0.01 max.

> Tensile Requirements

Class 1 Plates 

Grade

Tensile (MPa)

Yield (MPa)

Elong. (50mm)

Reduc'n of Area*

2, 12

380 - 550

230 min

22% min

-

11

415 - 585

240 min

22% min

-

22, 21, 5, 9

415 - 585

205 min

18% min

40% min

21L, 22L 

415 - 585

205 min

18% min

40% min

* Measured on a flat specimen

Class 2 Plates

Grade

Tensile (MPa)

Yield (MPa)

Elong. (50 mm)

Reduc'n of Area*

 2

485 - 620

310 min

22% min

-

11

515 - 690

310 min

22% min 

-

12

450 - 585

275 min

22% min

-

22, 21, 5, 9

515 - 690

310 min

18% min

40% min

91

585 - 760

415 min

18% min

-

* Measured on a flat specimen

As with all ASME and ASTM pressure vessel steels, Chrome Moly to SA387 and A387 is produced in conformity to SA20 / A20 which outlines the testing and retesting methods and procedures, permissable variations in dimensions and weight, quality and repair of defects, marking, loading, and ordering information.

In addition to the basic requirements of SA20 / A20 certain supplementary requirements are available when additional control, testing, or examination is required to meet end use requirements. These might include product analysis (S2), charpy V-notch impact test (S5), or ultrasonic testing (S12): a variety of supplementary requirements are available.

> More Information

For more information about Chrome Moly plate in general, or SA387 / A387 in particular, or for specific enquiries please contact Unisteel International at +971 4 4470515 or sales@unisteel-international.com for more information and assistance.