TRENCH BOXES - DOUBLE SIDE RAIL
The Double Slide Rail Shoring consists of individual shoring components that are combined inside the trench to form a shoring wall. Our double slide rails with rolling strut remain parallel during the excavating and lowering procedure. In fact, the shoring plates can be easily sunken and extracted even in deep excavations. The trench width stays unchanged at any time during the setting up phase. In consequence, the forces required for the Trench box - double side rail shoring installation and removal are reduced.
The single rolling strut offers an optimum working room during all operation phases. It can be placed at any time at the ideal position for the excavator to work in the trench without restrictions. Due to the strength of the system, the strut can be placed at 3.8 m height from the bottom.
This double slide rail makes the system much easier to use than any other double slide rails on the market. The rolling strut is available for single and double slide rail for a maximum excavation depth to 7.6 m (double slide rail shoring XL)
PL
SRH
WW
RT
SL
PH
PT
PCL
Plate length
Slire dail height
Working width
Slire Rail thickness
System length
Plate Height
Plate thickness
Pipe clearance length
RSH
RSW
DPL
FH
FW
Rolling Strut height
Rolling Strut width
Distance piece length
Flange height
Flange width
ROLLING STRUT - STANDARD
Height RSH (m)
Width RSW (m)
Flange width FW (mm)
Flange height FH (mm)
Weight / RS-pair (kg)
Min. Working width WW (m)
2.04
0.5
405
720
980
1.24
DISTANCE PIECE - STANDARD
Length DPL (m)
Weight (kg)
0.25
163
0.5
201
0.75
239
1.00
277
2.00
427
3.00
597
Please feel free to contact Unisteel International DMCC at +971 4 447 0515 or sales@unisteel-international.com for more information and assistance. We can offer you a quick solution through our stock. We rent also trench sheets in UAE. Check our catalogue